IceTech

IceMaker PR1500H
Production of high-density dry ice pellets.
The IceMaker PR1500H from IceTech represents a state of the art
Dry Ice Pelletizer packed with features for easier operation, swift
production shifts and high capacity. 

The automatic change of extruder plates also removes downtime
and reduces loss of valuable CO₂. The pellet length and quality
are optimized using the new pelletizer, and the complete version
of the IceMaker PR1500H can produce four sizes of pellets at
the same time. The IceMaker PR1400H contains lots of technical
features compared to existing products on the market. For instance
a heat exchanger is used to minimize waste of energy during the
sublimation process. The hydraulic unit use logic components
for higher performance.

The machine parts are protected by a moisture-free enclosure,
which also reduces the noise level to a minimum (below 75 dB(A).
The IceMaker PR1500H provides a non-stop supply of high-density
dry ice pellets. The source of raw material for the production of
pellets is liquid carbon dioxide conserved at low temperature in
a storage tank.

The liquid CO₂ flows into the machine in a regulated manner and
is transformed into CO₂ snow which is then pressed through an
extruder plate by means of the horizontal movement of a
hydraulic driven piston.

The IceMaker PR1500H is build on the latest technical advances in
industrial PC controls which includes a 12.1” color touch display
optimized for easy and intelligent control via multi-lingual context.
It’s also prepared for easy integration in your company’s control
system. It can be a simple remote start/stop button or a more
sophisticated solution via a BUS/Ethernet connection.

If the IceMaker PR1500H is connected to your LAN or Internet,
the entire display can be transferred to the computer desktop
of your choice – anywhere in the world.

 IceTech Dry Ice Production PR1500H

Dimensions mm/inch:

Length: 1500 / 59
Width:   2000 / 79
Height:  1800 / 71
Height:  1845 / 73.6 (incl. ext. legs)

Weight: 

kg: 3400 / lbs: 7495

Rated Output:

kg/h:  up to 1500
lbs/h: up to 3086
of high quality dry ice pellets, depending
on the extruder plate applied

Pellet Size:

Diameter:
mm : 3 - 10 or 16
inch: 0.11 - 0.39 or 0.62

Cylindrical
- length varying from:

mm: 50 to 100
inch: 1.96 to 3.93

Inlet Liquid CO₂ Pressure:

bar: 16 - 22
psi: 232 - 319

 Liquid CO₂ Dryness Fraction:

The water content should not exceed 35 ppm and
should not be less than 5 ppm – or equivalent to a
dewpoint temperature of -66°C to -51°C
(-86.8°F to -59.8°F).
NOTE:
The liquid CO₂ supply must be completely free of oil and
must have a purity of min. 99.9%.

Liquid CO₂ Supply Pipe:

Internal dia. 20 mm (0.8 inch), very well insulated with
a minimum number of bends and fittings.
NOTE:
If over 20 m (65.6 feet) in length, always use an
internal dia. of 25 mm (1 inch).

Internal dia. 125 mm (5 inch)

Process unit

Weight
kg: 57,5
lbs: 125.6
Item no.: 501415

Lower Screen
for die holder

Upper Screen
for die holder

Grip knob for screen

Outlet Sprout

Flange for Outlet Sprout

Clamp for Outlet Sprout
Incl. Packing

Telephone

IceTech technical staff
will guide you through...
24-hour Technical Support hotline

Extruder Plate:
3 mm, complete

Pellets Size
mm: 3
inch: 0.118

Weight
g: 3027
lbs: 6.673
Item no.: 501478

Extruder Plate:
10 mm, complete

Extruder Plate:
16 mm, complete

Amount
L: 300
Gallon: 79

Item no.: 500935

Mounting kit for
installation of IceMaker PR1500H  
and additional CO₂ filtration

Item no.:  105062