The IceTech IceMaker presents a revolutionary alternative to existing dry ice making machines. The IceMaker provides non-stop supply of high-density dry ice pellets from a source of low temperature liquid carbon dioxide.
From a storage tank, a regulated supply of liquid CO2 is expanded to low pressure and forms the dry ice snow which is then pressed through a multiport extruder die by a single acting horizontal reciprocating piston.
The IceMaker is placed in a closed steel cabinet, which has been muffled to limit the noise level and includes the latest technical advances in heat exchangers as it enables the user to limit startup time and improve the quality of the pellets compared to existing products on the market.
Adobe Flash Player not installed or older than 9.0.115!
IceMaker PR150 Production of high-density dry ice pellets.
Extruder Plate
Extruder Plate: 3 mm, complete
Pellets Size mm: 3 inch: 0.118
Weight g: 3200 lbs: 7.054 Item no.: 100121
Extension legs
Set of extension legs for pelletizer
Dimensions m/ft Length: 10 / 32 Item no.: 105036
Key
Key for extruder plate:
Weight g: 600 lbs: 1.322 Item no.: 109031
IceMaker PR150 Production of high-density dry ice pellets.
kg/h: up to 120-200 lbs/h: up to 265-441 of high quality dry ice pellets, depending on the extruder plate applied
Pellet Size:
Diameter: mm : 1.7 - 3 - 6 - 10 - 13 or 16 inch: 0.066 - 0.11 - 0.23 - 0.39 - 0.51 or 0.62
Cylindrical - length varying from:
mm: 50 to 100 inch: 1.96 to 3.93
Inlet Liquid CO2 Pressure:
bar: 16 - 22 psi: 232 - 319
Liquid CO2 Dryness Fraction:
The water content should not exceed 35 ppm and should not be less than 5 ppm – or equivalent to a dewpoint temperature of -66°C to -51°C (-86.8°F to -59.8°F). NOTE: The liquid CO2 supply must be completely free of oil and must have a purity of min. 99.9%.
Liquid CO2 Supply Pipe:
Internal dia. 20 mm (0.8 inch), very well insulated with a minimum number of bends and fittings. NOTE: If over 20 m (65.6 feet) in length, always use an internal dia. of 25 mm (1 inch).
Outlet Pipe:
Internal dia. 50 mm (2 inch)
Power Supply:
3 x 400 V AC + PE, 50/60 Hz, Imax. 16 A
IceMaker PR150 Production of high-density dry ice pellets.
Extruder Plate
Extruder Plate: 3 mm, complete
Pellets Size mm: 3 inch: 0.118
Weight g: 3200 lbs: 7.054 Item no.: 100121
Extruder Plate: 10 mm, complete
Pellets Size mm: 10 inch: 0.393
Weight g: 6050 lbs: 13.337 Item no.: 100050
Extruder Plate: 16 mm, complete
Pellets Size mm: 16 inch: 0.629
Weight g: 5600 lbs: 12.345 Item no.: 100050
Plug
Cap for Pelletizer PR150 / PR300
Weight g:50 / lbs: 0.110
Item no.: 500981
Key
Key for extruder plate
Weight g: 600 / lbs: 1.322 Item no.: 109031
Extension legs
Set of extension legs for pelletizer
Item no.: 105036
Mounting Kit
Mounting kit for installation of IceMaker PR150 and additional CO2 filtration
Weight g: 14.500 / lbs: 31.967
Item no.: 105062
Service Kit
1,000 + 2,000 hour Service kit for Pelletizer PR150
UK IceTech PR150 Spec Sheets